How To Fix Bricked Samsung Galaxy J3 Pro/Unroot/Flash Stock ROM (Download)
Learn How to Flash Stock ROM in Samsung Galaxy J3 Pro or How to fix bricked Galaxy J3 Pro: If You have a Samsung Galaxy J3 Pro and if you are facing any problem like your galaxy J3 Pro is Bricked, stuck at the Samsung Logo, Galaxy J3 Pro gets blank out screen, custom binary blocked by frp or fap, J3 Pro is not starting or Bootloop problem, also if your J3 Pro is rooted and you want to Unroot your Galaxy J3 Pro or any of problem is happening with your Samsung Galaxy J3 Pro then don't worry about your Bricked Galaxy J3 Pro, here you will get all in one complete solution for your Samsung Galaxy J3 Pro, you can easily fix your J3 Pro by simply Flashing Stock ROM in Samsung Galaxy J3 Pro.
Samsung Galaxy J3 Pro Specification
Samsung Galaxy J3 Pro is entire range smartphone, it comes with very good and attractive features like
Network
Announced- 2016, June
Body
Display
Platform
Memory
Camera
Sound
Battery
All In One Solution: Flashing Stock ROM In Samsung Galaxy J3 Pro
You can solve the any of Problems about your Galaxy J3 Pro, By simply Flashing Stock ROM in Samsung Galaxy J3 Pro, some of problems I've listed below, which you can solve easily by just flashing ROM:
According to me flashing ROM in any device is a best trick to comeback android again in its original condition, which make feels you like you've purchase your phone after flashing stock ROM. and the best advantage is that if you've rooted your phone, then its common you had lost your warranty, and after flashing Stock ROM you can get your phone's warranty back officially.
Requirements For Flashing Stock ROM In Samsung Galaxy J3 Pro
Before going for flashing Stock ROM in Samsung Galaxy J3 Pro, you've need some requirements, that I've Listed below:
Make sure you've check all the above requirements that I've listed, all the downloads- Odin, USB Drivers and Firmware(Stock ROM) comes with in a zip format you have to extract all the files before using.
you can extract these files with 7Zip, if you don't have 7Zip then download it from here.
For flashing firmware in Samsung Galaxy J3 Pro, check once again the requirements, if you've done then go further and follow carefully the given steps:
Step1.
After installing USB Drivers in your PC or Laptop, Reboot your Samsung Galaxy J3 Pro into Download mode by pressing Home button + Power Button + Volume Down key at a same time for 3-4 seconds until its goes to Download mode, and select continue for flashing process:
Step2.
Now Open Odin.****.exe and after reboot your device in download mode connect it with your PC with help of a data cable, after connecting Odin will indicate you a message "Added" and ID: COM port on Odin will turn Blue or Yellow depending on Odin's version, that also means Odin tool is ready for flashing firmware.
Step3.
Now Click on AP or PDA for selecting your firmware that is in .tar or .tar.md5 extension, simply select it and now click on start option on Odin, and leave all settings remain, you have to check only "Auto Reboot" and "F. Reset Time" and leave all settings unchecked, after clicking on start button your flashing process will be start and it takes 5-7 minutes, and when its completed, it will indicate a message PASS on Odin, your device will be automatically Reboot and restart in few minutes, keep patience and do not unplug before its complete, check in below image:
Step4.
In case, If you got a multi firmware like AP, BL, CP, CSC and .PIT files, then while flashing select all your components one by one and also .PIT file if you have to flash a multi firmware , Check only Re- Partition and F. Reset Time and leave all settings unchecked, now click on start and until your flashing completed. see image in below:
Fixing Boot loop Problem After Flashing Firmware
In some cases, your device might stuck in Boot loop problem, to solve this simply reboot your device into recovery mode by pressing Power + Home + Volume UP and do a wipe data/factory reset, and reboot your device, it will start properly and all problems are now solved! congratulations! you've successfully installed Stock ROM in your Samsung Galaxy J3 Pro.
Problems While Flashing Stock ROM Via Odin
I've listed some common problems while flashing Stock ROM in Samsung Galaxy J3 Pro, so if you are facing any problem, check it double, and try again:
Conclusion
Thanks for reading, the post was about How to flash stock ROM in Samsung galaxy J3 Pro to fix any of problem like Bootloop, blank out screen, or if you want to Unroot your phone and get Warranty officially in your Samsung Galaxy J3 Pro. If you are still struggling about your Galaxy J3 Pro, then you can ask questions in comment about flashing ROM in Galaxy J3 Pro.
 |
| Samsung Galaxy J3 Pro |
Samsung Galaxy J3 Pro Specification
Samsung Galaxy J3 Pro is entire range smartphone, it comes with very good and attractive features like
Network
- GSM / CDMA / HSPA / EVDO / LTE
Announced- 2016, June
Body
- Weight- 139 g (4.90 oz)
- SIM- Single SIM (Micro-SIM) or Dual SIM (Micro-SIM, dual stand-by)
Display
- Display Type- Super AMOLED capacitive touchscreen, 16M colors
- Display Size- 5.0 inches (~68.0% screen-to-body ratio)
- Resolution- 720 x 1280 pixels (~294 ppi pixel density)
- Multitouch- Yes
Platform
- OS- Android OS, v5.1 (Lollipop)
- CPU- Quad-core 1.2 GHz
Memory
- Card slot- microSD, up to 128 GB (dedicated slot)
- Internal- 16 GB, 2 GB RAM
Camera
- Primary- 8 MP, f/2.2, autofocus, LED flash
- Features- Geo-tagging, touch focus, face detection, HDR
- Video- 1080p@30fps
- Secondary- 5 MP, f/2.2
Sound
- Alert types- Vibration; MP3, WAV ringtones
- Loudspeaker- Yes
- 3.5mm jack- Yes
Battery
- Removable Li-Ion 2600 mAh battery
All In One Solution: Flashing Stock ROM In Samsung Galaxy J3 Pro
- How To Root Any Android Phone Without PC- Complete guide
- Top 8 Major reasons for any soft-bricked android phones- you should know about
You can solve the any of Problems about your Galaxy J3 Pro, By simply Flashing Stock ROM in Samsung Galaxy J3 Pro, some of problems I've listed below, which you can solve easily by just flashing ROM:
- If your Samsung Galaxy J3 Pro is not starting
- If your Samsung Galaxy J3 Pro stucks at blank out screen only
- If your Samsung Galaxy J3 Pro stucks at Samsung Logo
- You can Unroot your Samsung Galaxy J3 Pro, and again get its warranty officially.
- If your Samsung Galaxy J3 Pro Stucks at Bootloop.
- If your Samsung Galaxy J3 Pro showing custom binary blocked by frp or fap.
- If you don't have a backup of your Stock ROM and you've already installed a custom ROM in your Samsung Galaxy J3 Pro, and want to revert it back into your original condition, just Flash Stock ROM.
According to me flashing ROM in any device is a best trick to comeback android again in its original condition, which make feels you like you've purchase your phone after flashing stock ROM. and the best advantage is that if you've rooted your phone, then its common you had lost your warranty, and after flashing Stock ROM you can get your phone's warranty back officially.
Warning: This tutorial is only for Samsung Galaxy J3 Pro, don't try this tutorial for flashing ROM in other android phones.
Requirements For Flashing Stock ROM In Samsung Galaxy J3 Pro
- What is Rooting? Advantages and Disadvantages of Rooting
- How To Make Private Folder Without Any Software On Desktop (Command Prompt)
- How To Root Any Android Phone Without PC- Complete guide
Before going for flashing Stock ROM in Samsung Galaxy J3 Pro, you've need some requirements, that I've Listed below:
- A PC or Laptop
- Make sure your phone's battery is charged at least 50%
- Enable USB Debugging- Go to your settings> about phone> find Build number and tap it 4-7 times until its show you a message "Now You've a Developer Option". Now go to your settings> developer options> Tick on USB Debugging. (If your phone is not bricked, otherwise leave this option)
- Make a full Backup of all your apps and important data, because flashing ROM can erase everything from your Phone's memory. (If your phone is not bricked, otherwise leave this option)
- Download Odin Flashing Tool From Here- Odin 3.09 (this is a zip file, first extract it to use)
- Download USB Driver for Samsung Galaxy J3 Pro - USB driver (this is a zip file, first extract it to use)
- Download Stock ROM for your Samsung Galaxy J3 Pro, check your model and download Stock ROM from here I've listed below:
Make sure you've check all the above requirements that I've listed, all the downloads- Odin, USB Drivers and Firmware(Stock ROM) comes with in a zip format you have to extract all the files before using.
you can extract these files with 7Zip, if you don't have 7Zip then download it from here.
How To Flash Stock ROM In Samsung Galaxy J3 Pro
- How To View Hidden Facebook Password Behind Asterisks In Any Browser
- How To Play DOS Games On Windows 7,Windows 8, Windows 10 (Dangerous Dave, Mario)
For flashing firmware in Samsung Galaxy J3 Pro, check once again the requirements, if you've done then go further and follow carefully the given steps:
Step1.
After installing USB Drivers in your PC or Laptop, Reboot your Samsung Galaxy J3 Pro into Download mode by pressing Home button + Power Button + Volume Down key at a same time for 3-4 seconds until its goes to Download mode, and select continue for flashing process:
 |
| Download mode- Samsung Galaxy J3 Pro |
Step2.
Now Open Odin.****.exe and after reboot your device in download mode connect it with your PC with help of a data cable, after connecting Odin will indicate you a message "Added" and ID: COM port on Odin will turn Blue or Yellow depending on Odin's version, that also means Odin tool is ready for flashing firmware.
Step3.
Now Click on AP or PDA for selecting your firmware that is in .tar or .tar.md5 extension, simply select it and now click on start option on Odin, and leave all settings remain, you have to check only "Auto Reboot" and "F. Reset Time" and leave all settings unchecked, after clicking on start button your flashing process will be start and it takes 5-7 minutes, and when its completed, it will indicate a message PASS on Odin, your device will be automatically Reboot and restart in few minutes, keep patience and do not unplug before its complete, check in below image:
Step4.
In case, If you got a multi firmware like AP, BL, CP, CSC and .PIT files, then while flashing select all your components one by one and also .PIT file if you have to flash a multi firmware , Check only Re- Partition and F. Reset Time and leave all settings unchecked, now click on start and until your flashing completed. see image in below:
Fixing Boot loop Problem After Flashing Firmware
In some cases, your device might stuck in Boot loop problem, to solve this simply reboot your device into recovery mode by pressing Power + Home + Volume UP and do a wipe data/factory reset, and reboot your device, it will start properly and all problems are now solved! congratulations! you've successfully installed Stock ROM in your Samsung Galaxy J3 Pro.
 |
| recovery-mode-Samsung Galaxy J3 Pro |
I've listed some common problems while flashing Stock ROM in Samsung Galaxy J3 Pro, so if you are facing any problem, check it double, and try again:
- If you don't install Samsung USB Driver properly
- lose or Duplicate Data Cable
- Wrong firmware, which means you are not using compatible firmware for your device
- Check only Auto Reboot and F. Reset Time and leave all boxes unchecked for single firmware, and for multi firmware- check Re- Partition and F. Reset Time and leave all boxes unchecked.
[[Note= Sometimes Flashing Stock ROM Might Soft-Brick Your Device, Do At Your Own Risk! I'll Be Not Responsible For Your Soft-Bricked Android]]
Conclusion
Thanks for reading, the post was about How to flash stock ROM in Samsung galaxy J3 Pro to fix any of problem like Bootloop, blank out screen, or if you want to Unroot your phone and get Warranty officially in your Samsung Galaxy J3 Pro. If you are still struggling about your Galaxy J3 Pro, then you can ask questions in comment about flashing ROM in Galaxy J3 Pro.
Comments
Post a Comment
Have any question?, Do comments,
I will reply you all not immediately, but definitely.