How To Flash Stock ROM 5.0 Lollipop In Micromax Unite 2 A106/Fix Storage Problem
Learn how to flash Stock ROM 5.0 Lollipop using SP Flash Tool in Micromax Unite 2 A106, if you are facing any kind of problem like app storage problem in your micromax unite 2 or if you want to upgrade your unite 2 from kitkat to lollipop then here you will learn how to upgrade directly Micromax unite 2 from kitKat to Lollipop using SP Flash Tool.
Micromax Unite 2 A106 comes with upgradable operating system 4.4.4 KitKat to 5.0 Lollipop, anyone can upgrade micromax unite 2 A106 from kitkat to lollipop directly through Internet connection, there is no need of any kind of software to upgarde unite 2, but when its done users starts facing app storage problem in their unite 2 A106, its really annoying when you are unable to install too many apps in your android phone.
Requirements Before Flashing Stock ROM 5.0 Lollipop In Micromax Unite 2 A106
You need to Extract/Unzip all these files (Downloads) with 7zip or Winrar etc. before flashing stock firmware/ROM in unite 2
How To Flash Stock ROM/Firmware 5.0 Lollipop In Micromax Unite 2 A106 using SP Flash Tool
Anyways, we are here to fix app storage problem in micromax Unite 2 A106 with Stock ROM 5.0 Lollipop, so that we need to flash stock ROM 5.0 Lollipop in unite 2 using SP Flash Tool, here I've listed few steps for how to flash Stock ROM 5.0 Lollipop in unite 2 using SP Flash Tool:
Step1.
Extract/Unzip your Sp Flash Tool with 7zip or winrar etc. and find its type "application", and click on it to open sp flash tool
Step2.
Now Extract/Unzip that firmware you've downloaded from above link, now open Sp flash tool and click on scatter-loading this will open a tab for open scatter file, now select MT6582_Android_scatter.txt from your extracted firmware folder
Step3.
Now you have to select Firmware upgrade from drop down menu which you can easily see in screenshot, make sure all files are loaded as shown in below screenshot
Step4.
after selecting Firmware upgarde, click on "download" and "remove your phone's battery" immediately and connect it with your PC through its original USB data cable. now your flashing process will start automatically, wait for 4-5 minutes while flashing
Step5.
After successfully flashing, you can see a popup message in green circle "Download ok" thats it! you're all done! now you can remove your Unite 2 from PC and switch on your phone normally, in first time it will take some time about 7-10 minutes don't panic its normal process, so wait until up to at least 10 minutes, if your phone still not starts then check and try again this whole process, Good Luck!
Problems While Flashing Stock ROM/Firmware In Unite 2 using Sp Flash Tool
If you are unable to flash stock ROM/Firmware in your unite 2 then there could be following reasons which I've listed below
[[Note- Flashing stock ROM using Sp flash tool might bricks your phone, so do at your own risk! I'll be not responsible for your soft-bricked phone]]
Top 8 Major Reasons For Any Soft-Bricked Android Smartphone (How To Avoid)
WIFIKILL Pro Apk- Download It Free To Cut WiFi Of Others With Your Android
How to Download Any Paid Android Apps for Free
Conclusion
The post was about How to flash Stock ROM In Micromax Unite 2 A106 using Sp Flash Tool to fix app storage problem, if you find this article helpful then share it on social media and if you are still facing any problem with your micromax unite 2 A106 then write your problem here in commenting section, I'll try to help you, thanks!
Micromax Unite 2 A106 comes with upgradable operating system 4.4.4 KitKat to 5.0 Lollipop, anyone can upgrade micromax unite 2 A106 from kitkat to lollipop directly through Internet connection, there is no need of any kind of software to upgarde unite 2, but when its done users starts facing app storage problem in their unite 2 A106, its really annoying when you are unable to install too many apps in your android phone.
Requirements Before Flashing Stock ROM 5.0 Lollipop In Micromax Unite 2 A106
- Make sure your battery is charged at least 60%
- Make a full backup of your internal storage, because flashing stock rom using sp flash tool will erase/format all of your internal storage and data from your device.
- Download- Lollipop Firmware (this firmware can be flash in both 4 GB and 8GB model)
- Download- MediaTek Drivers
- Make sure you have installed Mediatek Drivers in your Laptop or PC, Mediatek drivers are most important thing that many users avoid and failed to flash stock ROM using SP Flash Tool
- Download- Sp Flash Tool
You need to Extract/Unzip all these files (Downloads) with 7zip or Winrar etc. before flashing stock firmware/ROM in unite 2
How To Flash Stock ROM/Firmware 5.0 Lollipop In Micromax Unite 2 A106 using SP Flash Tool
Anyways, we are here to fix app storage problem in micromax Unite 2 A106 with Stock ROM 5.0 Lollipop, so that we need to flash stock ROM 5.0 Lollipop in unite 2 using SP Flash Tool, here I've listed few steps for how to flash Stock ROM 5.0 Lollipop in unite 2 using SP Flash Tool:
Step1.
Extract/Unzip your Sp Flash Tool with 7zip or winrar etc. and find its type "application", and click on it to open sp flash tool
 |
| Sp Flash Tool Is Loading For Flashing Firmware In Micromax Unite 2 A106 |
Step2.
Now Extract/Unzip that firmware you've downloaded from above link, now open Sp flash tool and click on scatter-loading this will open a tab for open scatter file, now select MT6582_Android_scatter.txt from your extracted firmware folder
 |
| How To Flash Stock ROM In Micromax Unite 2 A106 Using Sp Flash Tool. |
Step3.
Now you have to select Firmware upgrade from drop down menu which you can easily see in screenshot, make sure all files are loaded as shown in below screenshot
 |
| How To Flash Stock ROM In Micromax Unite 2 A106 Using Sp Flash Tool. |
Step4.
after selecting Firmware upgarde, click on "download" and "remove your phone's battery" immediately and connect it with your PC through its original USB data cable. now your flashing process will start automatically, wait for 4-5 minutes while flashing
 |
| How To Flash Stock ROM In Micromax Unite 2 A106 Using SP Flash Tool.. |
Step5.
After successfully flashing, you can see a popup message in green circle "Download ok" thats it! you're all done! now you can remove your Unite 2 from PC and switch on your phone normally, in first time it will take some time about 7-10 minutes don't panic its normal process, so wait until up to at least 10 minutes, if your phone still not starts then check and try again this whole process, Good Luck!
 |
| How To Flash Stock ROM In Micromax Unite 2 A106 Using Sp Flash Tool. |
- All Problems and Solutions for micromax unite 2 A106 (100 % working)
- How To Fix Invalid IMEI in Micromax Unite 2 A106
- How To Root Micromax unite 2 without PC
If you are unable to flash stock ROM/Firmware in your unite 2 then there could be following reasons which I've listed below
- MediaTek drivers are not installed properly in your system
- Lose duplicate USB data cable
- Phone's battery is not charged at least 50%
- After flashing switch on your phone and wait at least 10 Minutes
- If you are trying to flash corrupted Firmware
- If you have not followed above steps carefully.
[[Note- Flashing stock ROM using Sp flash tool might bricks your phone, so do at your own risk! I'll be not responsible for your soft-bricked phone]]
Conclusion
The post was about How to flash Stock ROM In Micromax Unite 2 A106 using Sp Flash Tool to fix app storage problem, if you find this article helpful then share it on social media and if you are still facing any problem with your micromax unite 2 A106 then write your problem here in commenting section, I'll try to help you, thanks!
Comments
Post a Comment
Have any question?, Do comments,
I will reply you all not immediately, but definitely.